A useful way to get an initial irrigation cost estimate is with a price per zone. It gives you a starting point without having to build a shopping list before you know how the garden will be watered. Our INSTANT Irrigation Quote then helps you turn that broad guide into an estimate for your own lawn and garden beds, providing a clear view of the irrigation cost.
A per-zone budget to get started
These following figures were generated in our INSTANT Quote, using example systems with two zones, four zones or six zones. They include an allocation for shared equipment (like valves & controller), not just the sprinklers or drip tube in one area.
| Irrigation type | Cost per zone (DIY) | Cost per zone (by Installer)* |
|---|---|---|
| Garden beds: micro or spray | about $170 to $370 | about $710 to $1,220 |
| Garden beds: drip tube | about $440 to $580 | about $1,110 to $1,530 |
| Lawn: spray, rotary or gear drive | about $230 to $480 | about $800 to $1,380 |
| Lawn: subsurface drip | about $840 to $1,020 | about $1,710 to $2,180 |
*The installed figures are tool-based budgeting guides only. They are not quotes, market-rate surveys or prices offered by a particular installation business. An installer will assess the site and provide their own price, inclusions and terms.
How to get a Irrigation Quote Now
Start your INSTANT Irrigation Quote for a guide based on your own garden rather than a general per-zone allowance.
The tool helps you work through:
- How much lawn and garden bed you want to water, including separate areas.
- Which irrigation methods suit those areas.
- What your water supply can deliver.
- The control options and distances involved.
- Whether you are planning a DIY project or exploring installation.
You do not need a detailed parts list or a scaled drawing to get started. Have your approximate areas and water-supply information ready, then use the result to plan the next step. Our water-supply measurement guide shows the simple bucket test if you have not measured the flow yet.
What changes the cost per zone?
The area and layout. A small bed and a large lawn can each need a zone, but they need different amounts of pipe and watering equipment. Head placement and available flow help determine the zone count.
The irrigation method. Compare lawn sprinklers and drip irrigation for the job they need to do, rather than choosing by the lowest per-zone figure alone.
The control setup. A simple tap timer, a battery controller and an automatic multi-zone system have different equipment requirements. Wi-Fi and flow monitoring can also change the budget.
The site work. Access, trenching, paths, established planting and reinstatement all affect installation. A new garden and a finished landscape are different jobs, even with the same number of zones. Pumps, tanks, a new power point or changes to the mains connection need their own assessment.
How to get a price you can trust
Start with the INSTANT Irrigation Quote to establish a useful budget, then confirm the actual layout, supply and scope before ordering or booking installation.
For an installed system, ask the installer to confirm what their price covers: equipment, trenching and reinstatement, connection work, electrical work where needed, delivery, GST, commissioning and warranty. Check any exclusions and who is responsible for each part of the job.
For DIY, confirm the selected equipment and quantities against your final plan. The per-zone guide is a planning aid, not a complete design or an instruction to buy identical equipment for every zone.
Ready to put a budget against your garden? Get your INSTANT Irrigation Quote now.
What a full service solution, take the next step with a professional irrigation design from our Design Department.
Last updated: 12 November 2026









