Rain Bird BPES Brass Solenoid Valve 80mm (inc. FC & Scrubber)

Our range includes high-flow solenoid valves, self-cleaning, high-pressure, brass & non-potable options. Options cover different sizes, materials, and specifications suit & match any commercial system requirements.

Commercial irrigation valves are heavy-duty valves designed for large-scale systems such as parks, sports fields, and commercial properties. They are built to handle higher flow rates, greater water pressure, and more frequent operation compared to residential valves.

Different brands of commercial irrigation valves are generally cross compatible with any brand of irrigation controller, they key consideration is the electrical specifications of the system. Generally, irrigation systems run on 24v AC power, but some brands of 2-wire decoder systems are designed to work with 12v DC Latching Coils.

Yes, SunshowerOnline supplies replacement solenoids, diaphragms, and other components for most major commercial valve brands, allowing for cost-effective repairs and ongoing maintenance.

Leaks may be due to debris trapped in the diaphragm, damaged seals, or cracked valve bodies. Disassemble and clean the valve, replace faulty parts, and check that fittings are tight and properly sealed.

Ensure you have a regular maintenance schedule system reliability & maximum up-time. You generally don’t need to replace valve internals unless a fault or a drop in performance is observed or you have known water quality issues. But regular valve external inspections for leaks & manual flushing will extend the lifespan of your valves.

Installing a master valve is highly recommended for most irrigation systems, especially larger or commercial setups. A master valve is an automatic valve installed on the main water supply line before any zone valves. It only opens when your irrigation controller is running a watering cycle.

Yes. Many homeowners successfully install their own irrigation valves. With the right tools, it’s a manageable project. SunshowerOnline provides detailed product information, helpful guides and expert advice to support your DIY installation.

However, if you prefer professional assistance, we can connect you with qualified installers.

Irrigation valves are mostly a set & forget proposition, but if you’re noticing a drop in performance, you may need to open up your valves  debris and signs of wear and tear. For preventative maintenance, you can flush your system periodically using the manual bleed on your valve to remove any buildup that could clog valves or sprinklers.

The lifespan of an irrigation valve can vary depending on several factors, including the valve quality, water quality and system maintenance. Generally, a well-maintained valve made from durable materials can last 10–15 years or more. And while uncommon, factors like hard water with mineral buildup or frequent pressure fluctuations can shorten their lifespan.

The standard irrigation valves has a 25mm BSP thread with a 24v AC Solenoid Coil, those specs are compatible with standard irrigation controllers & pipe connections & are suitable for most irrigation applications. For battery applications you’ll need to work with 12v DC Latching solenoid coils & when flow requirements increase, you’ll need to consider larger thread sizes.

Typical symptoms include zones not turning on or off, water leaking when the system is off, low or no water flow. These issues often indicate electrical faults, blockages, or worn components.

If an irrigation valve isn’t opening, it’s likely because of an electrical fault. Insufficient, or no power is reaching the valve to open it, or the solenoid coil itself has failed. This could be due to a faulty controller, a cut wire, failing cable joins, undersized cable or a failing solenoid coil. You can test test by process of elimination, or book a contractor come and assist

If you have determined that a solenoid coil has failed, you can replace just the solenoid coil, rather than the entire valve. SunshowerOnline stocks replacement coils and parts for most major brands.

Irrigation Valve Installation typically requires installation in a manifolded configuration. This can be done with PVC fittings (most economical), or specialist Manifold Fittings (easiest install and maintenance). Our range includes all necessary connectors, adaptors, and joiners for quick and secure setup.

Most 24V AC solenoid valves are compatible with standard irrigation controllers. For battery-operated or DC systems, ensure your controller and valve are matched for voltage and type.

All solenoid valves and fittings come with manufacturer warranties and the backing of our expert support team. We’re here to help with product selection, troubleshooting, installation advice, and ongoing system care.

Fully installed by a professional, a domestic irrigation system will come out to about $1000 per zone. And as a DIY project, it can look more like $300 per zone! But of course that’s a very rough estimate, each system is different and there are a lot of factors to consider. Thankfully, we have the only tool around that INSTANTLY give an accurate estimate for your. Try our INSTANT Irrigation Quote Tool here!

To choose the right irrigation system, consider the size and layout of your garden or lawn, the types of plants you’re watering and your water source. Spray systems are ideal for most applications like lawns and gardens, while drip irrigation works well for mulched garden beds and areas exposed to wind and evaporation. For expert advice tailored to your needs, request a quote from us.

To set up an irrigation system, start by planning the layout, then install the mainline pipes, valves and fittings. Attach the sprinklers, drip emitters or other irrigation devices, and connect the system to a controller. Finally, test and adjust the system to check for proper coverage and efficiency. For a more precise and tailored setup, visit our Design Department. Our experts can design and quote a customised irrigation system that perfectly fits your landscape.

At SunshowerOnline, we offer a wide range of irrigation systems perfect for home gardens, including spray irrigation, drip irrigation, pop-up sprinklers, micro irrigation. Just getting started? Our DIY kits make installation simple for beginners, while our expert team is available to help you design the ideal setup for your garden’s unique needs.

Our experienced Design Department can create a custom irrigation plan tailored to your property, whether you’re a homeowner, landscaper, or commercial manager. Simply provide your site details and requirements, and we’ll recommend the best products and layout for efficient, reliable watering. Need an instant quote? Try our INSTANT Quote tool!

Absolutely. We stock a comprehensive range of contractor-grade irrigation supplies, including control systems, valves, fittings, and commercial sprinklers, trusted by professionals across Australia. Bulk order discounts and trade support are available for our trade and commercial customers.

Yes, we offer step-by-step installation guides, video tutorials, and our service doesn’t stop once we a purchase is made. Expert advice over phone, chat or in-store is here to help! Whether you’re a DIY enthusiast or a professional installer, our resources make setting up your irrigation system straightforward and stress-free.

Yes, many of our irrigation products are designed for easy upgrades and retrofits. Whether you’re replacing old sprinklers, adding drip lines, or automating your watering schedule, our team can recommend compatible products and provide installation support.

To maximise the lifespan of your irrigation system, choose high-quality components, follow correct installation procedures, and perform regular maintenance such as flushing lines and checking for leaks. Our products are built to withstand Australian conditions, and our team is always here to offer ongoing support.

Yes, SunshowerOnline delivers irrigation supplies across Australia with fast, reliable shipping. Our customer service team is available to answer your questions, offer technical support, and ensure you find the right products for your project—no matter where you are located.