Vyrsa was formed in 1971, manufacturing irrigation products, valves and other accessories. Their range includes: Agriculture Sprinklers, Gardening Sprinklers, Control Systems & Accessories.
VYRSA exports to the five Continents by a 300 distribuitors network in more than 100 different countries.
The Vyrsa 1610 is a full circle low angle sprinkler for undertree and solid set watering systems.
15mm Male BSP thread
Delrin - plastic construction
Single nozzle - 3.0mm
8º Trajectory
Equivalent: NAAN 5024
..
The Vyrsa 37 is an economical sprinkler for overhead and solid set systems
Full circle plastic (Delrin) sprinkler
20mm BSP male thread
Dual bayonet nozzle (1/4 turn clip connection)
25° trajectory (both nozzles)
Equivalent NAAN 5035, Toro Model 2 & Toro Model TR2
..
The VYR-26 is a low flow sprayer specially designed to operate at different angles and under extreme temperature conditions. Its axis and springs are made of stainless steel, O-rings and washers in stainless steel, Teflon and special poly-carbonate to withstand contact with fertilizers more aggressive in the market.The wide range of plastic n..
The Vyrsa 802 is an economical part-circle sprinkler for landscape, small horticultural blocks, nursery and greenhouse irrigation.
Made from Delrin plastic
Part-circle (can be adjusted to full-circle)
Stream deflector and diffuser pin for radius adjustment
Anti-backsplash arm
25° trajectory
Equivalent to NAA..
The Vyrsa 36AF is an economical sprinkler for overhead and solid set systems.
Full circle plastic (Delrin) sprinkler
20mm male thread
Dual nozzle
Hooded springs for frost protection
25° trajectory (both nozzles)
Equivalent to: NAAN 5035, Toro Model 2 & Toro Model TR
..
The Vyrsa 25 brass impact sprinkler is a robust, low angle brass sprinkler, ideal for undertree and nursery applications.
Brass sprinkler.
15mm male thread.
Full circle.
24° nozzle trajectory.
Equivalent: Toro Premier
..
The Vyrsa 66 is an economical part-circle sprinkler for sprinkler systems that must avoid overthrowing on to roads, paths or adjoining areas.
Plastic (Delrin) sprinkler
20mm male thread
Part-Circle (can be adjusted to full circle)
Dual nozzle
Main nozzle 30°
Secondary nozzle 11°
..
The Vyrsa 35 is the workhorse of solid set, overhead and portable sprinkler systems.
Full circle brass sprinkler.
20mm male or female thread.
Dual nozzle.
26° trajectory (both nozzles).
Equivalent to NAAN 233, Toro Model 2 & Toro Model TR2
..
The Vyrsa 80 brass impact sprinkler is a robust part-circle sprinkler for landscape, small horticulture blocks, nursery and greenhouse irrigation.
Brass sprinkler
Part-circle (can be adjusted to full-circle)
Stream deflector and diffuser
Pin for radius adjustment.
Anti-backsplash arm
15mm male thread
2..
The Vyrsa VYR-70 is a full circle sprinkler made of brass. Its axis and springs are made of stainless steel; O-rings and washers in stainless steel Teflon and special poly-carbonate to withstand contact with the most aggressive fertilizers in the market. This sprinkler is designed to work under a flow range between 620 to 3360 lph, at press..
The Vyrsa VYR-60 is an agricultural sprayer made of brass. Its axis and springs are made of stainless steel; O-rings and washers in stainless steel Teflon and special poly-carbonate to withstand contact with the most aggressive fertilizers in the market. Used in full coverage irrigation with medium flow to cover the side and corner areas. This spri..
The Vyrsa 70V is a robust full circle sprinkler for systems with large sprinkler spacings.
Brass sprinkler full circle
25mm female thread
Dual nozzle
26° nozzle trajectory
Equivalent to NAAN 254 & Toro Model 15
..
The VYR-65 is a part-circle agricultural sprinkler, made of brass with 1" (25mm) BSP Male inlet thread. Its axis and springs are made of stainless steel, and their O-rings and washers in stainless steel , Teflon and special polycarbonate to withstand contact with the most aggressive fertilizers in the market.The Vyrsa brass part-circle spr..
The VYR-155 is an agricultural full-circle sprinkler, made ??of brass with a 1 1/4" (32mm BSP) male inlet thread and three nozzles. Its axis and springs are made of stainless steel, and their O-rings and washers in stainless steel, tetrafluoroethylene, and special polycarbonate to withstand contact with the most aggressive fertilizers in the mar..
The Vyrsa VYR-150 large brass part-circle sprinkler is designed for dust suppression and watering in mining and construction sites, feedlots, racetracks and arenas. Its axis and springs are made of stainless steel; O-rings and washers in stainless steel Teflon and special poly-carbonate to withstand contact with the most aggressive fertilizers i..
