Product Description

Cost and complexity have often limited decoder technology to higher-end systems. However, with the revolutionary EZ Decoder System (EZDS), you get all the advantages of two-wire installations with simpler, more cost-effective technology — so you can bring the power of two-wire control to more projects than ever before.

The PC-DM is compatible with all the features of our Hydrawise-enabled HPC Controller, and the ever-reliable Pro-C controller. Plug in either the PC-DM two-wire output modules to enable up to 28 (Pro-C) stations on a single pair of wires. Then simply place EZ Decoders at each valve!

EZ Decoders are small, waterproof, and come with color-coded wiring and a convenient LED status light. They do not require special wire or connectors to function. Better yet, the system can coexist with conventional output modules, allowing hybrid functionality of both direct-wired valves and decoder operations in the same controller. This technology also permits easy conversion of a conventionally wired system to two-wire using the existing wiring bundle. It’s that easy!

KEY BENEFITS

  • Number of stations: Up to 28, plus master valve
  • No special wire or connectors required
  • No special grounding or surge arrestors required in-line to maximize time and money savings during installation
  • Programmable decoders with no need to input individual serial numbers
  • P/MV can activate via the two-wire path for pump stations or distant master valves
  • Permits hybrid operations of conventional and decoder stations for added flexibility
  • EZ-1 decoders have built-in status LED for positive diagnostics

See the chart below to understand the cable sizes you will need to use depending on the run length from your controller to your farther solenoid.

Hunter PC-DM EZ Decoder Output Module (for PRO-C & HPC)

SPECIAL Hunter PC-DM EZ Decoder Output Module (for PRO-C & HPC) SKU: DCM-HUNPCDM $533.15
$1256.71

Hunter PC-DM EZ Decoder Output Module (for PRO-C & HPC)

SKU DCM-HUNPCDM
MPN PC-DM

In stock

Only
$586.47

$1256.71

Product Description

Cost and complexity have often limited decoder technology to higher-end systems. However, with the revolutionary EZ Decoder System (EZDS), you get all the advantages of two-wire installations with simpler, more cost-effective technology — so you can bring the power of two-wire control to more projects than ever before.

The PC-DM is compatible with all the features of our Hydrawise-enabled HPC Controller, and the ever-reliable Pro-C controller. Plug in either the PC-DM two-wire output modules to enable up to 28 (Pro-C) stations on a single pair of wires. Then simply place EZ Decoders at each valve!

EZ Decoders are small, waterproof, and come with color-coded wiring and a convenient LED status light. They do not require special wire or connectors to function. Better yet, the system can coexist with conventional output modules, allowing hybrid functionality of both direct-wired valves and decoder operations in the same controller. This technology also permits easy conversion of a conventionally wired system to two-wire using the existing wiring bundle. It’s that easy!

KEY BENEFITS

  • Number of stations: Up to 28, plus master valve
  • No special wire or connectors required
  • No special grounding or surge arrestors required in-line to maximize time and money savings during installation
  • Programmable decoders with no need to input individual serial numbers
  • P/MV can activate via the two-wire path for pump stations or distant master valves
  • Permits hybrid operations of conventional and decoder stations for added flexibility
  • EZ-1 decoders have built-in status LED for positive diagnostics

See the chart below to understand the cable sizes you will need to use depending on the run length from your controller to your farther solenoid.

Complete your project with these:
From
$450.00

$1022.41
From
$290.61

$622.74
Only
$126.04

Only
$939.74

Main Menu

$0

0

Product Specifications

Decoder Modules FAQs

A decoder system uses electronic modules (decoders) to control multiple irrigation valves over a two-wire path, enabling efficient and scalable irrigation management for large or complex sites.

Decoder systems are ideal for councils, sports fields, golf courses, commercial landscapes, and large residential projects needing flexible zone control and reduced wiring complexity.

Decoder systems reduce cable requirements, simplify installation and expansion, lower costs for large installations, and provide centralised, reliable valve control.

Typically no, a decoder controller is specifically manufactured for 2-wire decoder irrigation systems. So it’s a usually case of choosing one method or the other. However, hybrid systems do exist that incorporate both.

A two-wire cable is run from the controller, with decoders installed at each valve location. Each decoder is programmed with a unique address to operate its assigned valve.

Check for wire breaks, damaged insulation, or water ingress. Use a decoder system tester to identify faults, and ensure all decoders are securely connected and programmed.

All decoder systems come with manufacturer warranties and expert support from our team for system design, installation, programming, and troubleshooting.

Fully installed by a professional, a domestic irrigation system will come out to about $1000 per zone. And as a DIY project, it can look more like $300 per zone! But of course that’s a very rough estimate, each system is different and there are a lot of factors to consider. Thankfully, we have the only tool around that INSTANTLY give an accurate estimate for your. Try our INSTANT Irrigation Quote Tool here!

To choose the right irrigation system, consider the size and layout of your garden or lawn, the types of plants you’re watering and your water source. Spray systems are ideal for most applications like lawns and gardens, while drip irrigation works well for mulched garden beds and areas exposed to wind and evaporation. For expert advice tailored to your needs, request a quote from us.

To set up an irrigation system, start by planning the layout, then install the mainline pipes, valves and fittings. Attach the sprinklers, drip emitters or other irrigation devices, and connect the system to a controller. Finally, test and adjust the system to check for proper coverage and efficiency. For a more precise and tailored setup, visit our Design Department. Our experts can design and quote a customised irrigation system that perfectly fits your landscape.

At SunshowerOnline, we offer a wide range of irrigation systems perfect for home gardens, including spray irrigation, drip irrigation, pop-up sprinklers, micro irrigation. Just getting started? Our DIY kits make installation simple for beginners, while our expert team is available to help you design the ideal setup for your garden’s unique needs.

Our experienced Design Department can create a custom irrigation plan tailored to your property, whether you’re a homeowner, landscaper, or commercial manager. Simply provide your site details and requirements, and we’ll recommend the best products and layout for efficient, reliable watering. Need an instant quote? Try our INSTANT Quote tool!

Absolutely. We stock a comprehensive range of contractor-grade irrigation supplies, including control systems, valves, fittings, and commercial sprinklers, trusted by professionals across Australia. Bulk order discounts and trade support are available for our trade and commercial customers.

Yes, we offer step-by-step installation guides, video tutorials, and our service doesn’t stop once we a purchase is made. Expert advice over phone, chat or in-store is here to help! Whether you’re a DIY enthusiast or a professional installer, our resources make setting up your irrigation system straightforward and stress-free.

Yes, many of our irrigation products are designed for easy upgrades and retrofits. Whether you’re replacing old sprinklers, adding drip lines, or automating your watering schedule, our team can recommend compatible products and provide installation support.

To maximise the lifespan of your irrigation system, choose high-quality components, follow correct installation procedures, and perform regular maintenance such as flushing lines and checking for leaks. Our products are built to withstand Australian conditions, and our team is always here to offer ongoing support.

Yes, SunshowerOnline delivers irrigation supplies across Australia with fast, reliable shipping. Our customer service team is available to answer your questions, offer technical support, and ensure you find the right products for your project—no matter where you are located.

Hunter PC-DM EZ Decoder Output Module (for PRO-C & HPC)·Hunter PC-DM EZ Decoder Output Module (for PRO-C & HPC)·

You might also need...

From
$450.00

$1022.41
From
$290.61

$622.74
Only
$126.04

Only
$939.74

You might also like...

Only
$865.15

$1996.50
Iplex Freight

Iplex Delivery

Order Lengths & Coils of Pipe direct to site!
Making use of Iplex’s outstanding delivery network, don’t mess around waiting for delivery quotes & place your order online

Currently, we can only provide pricing for the following Metro areas & regional centres. 

See pricing for pipe orders Over $1000 & Under $1000, as follows:

Region Under $1000 Over $1000
Capital Cities (Melbourne, Sydney, Brisbane, Adelaide) $214.50 $143
Regional Centres (Geelong, Ballarat, Albury-Wodonga, Newcastle, Gosford, Wollongong, Gold Coast) $214.50 $143
All Other Areas Get a Freight Quote

Please note: In some circumstances (ie: exceptionally large orders/fringe delivery locations) freight costs can vary so this freight charge may not be final. We do absorb the cost in many cases, but when we can’t, we will make contact to discuss any additional costs.

If you have any specific requirements or questions you want to clarify before ordering, make contact & we’ll gladly assist. We’ve figured out freight solutions for almost situations.

Close window
Quick! Grab a 5% discount for your first order...

Plus – Save your Cart for later, get our best offers first & hear about upcoming events!

*Offer valid for new customers only

Or login here

Login

Forgot Password
Create an Account

Menu