SunshowerOnline Logo

The Vyrsa VYR-150 large brass part-circle sprinkler is designed for dust suppression and watering in mining and construction sites, feedlots, racetracks and arenas. Its axis and springs are made of stainless steel; O-rings and washers in stainless steel Teflon and special poly-carbonate to withstand contact with the most aggressive fertilizers in the market. Also suitable for small travelling irrigators. Average rotation is approximately 40 sec/ rotation.

 

Features:

  • 32mm BSP male thread
  • Part-Circle (can be adjusted to full circle)
  • Flow Range: 103 – 466 Lpm
  • Radius Range: 25 – 37m
  • Main nozzle trajectory: 27°, Secondary nozzle trajectory: 4°
  • Equivalent to NAAN 255PC
  • Individual nozzles for the Vyrsa VYR-150 can be found here: Vyrsa 150 Brass Impact Nozzles

 

Vyrsa 150 Full/Part Circle Brass Impact Sprinkler

Vyrsa 150 Brass Impact Sprinkler (9.0mm x 3.2mm Dual Nozzle)SKU: ISI-VYR15009032$517.92
$897.55

Vyrsa 150 Brass Impact Sprinkler (9.0mm x 3.2mm Dual Nozzle)


SKU ISI-VYR15009032
MPN VYR-150+V150N-9+V36N-3.2R
Warranty 12 month

In stock

Only
$517.92

$897.55
Vyrsa 150 Brass Impact Sprinkler (10.0mm x 3.2mm Dual Nozzle)SKU: ISI-VYR15010032$517.92
$897.55

Vyrsa 150 Brass Impact Sprinkler (10.0mm x 3.2mm Dual Nozzle)


SKU ISI-VYR15010032
MPN VYR-150+V150N-10+V36N-3.2R
Warranty 12 month

In stock

Only
$517.92

$897.55
Vyrsa 150 Brass Impact Sprinkler (11.0mm x 3.2mm Dual Nozzle)SKU: ISI-VYR15011032$504.59
$870.88

Vyrsa 150 Brass Impact Sprinkler (11.0mm x 3.2mm Dual Nozzle)


SKU ISI-VYR15011032
MPN VYR-150+V150N-11+V36N-3.2R
Warranty 12 month

In stock

Only
$504.59

$870.88
Vyrsa 150 Brass Impact Sprinkler (13.0mm x 6.3mm Dual Nozzle)SKU: ISI-VYR15013063$524.94
$911.59

Vyrsa 150 Brass Impact Sprinkler (13.0mm x 6.3mm Dual Nozzle)


SKU ISI-VYR15013063
MPN VYR-150+V150N-13+V36N-6.3R
Warranty 12 month

In stock

Only
$524.94

$911.59
Vyrsa 150 Brass Impact Sprinkler (14.5mm x 6.3mm Dual Nozzle)SKU: ISI-VYR15014563$524.94
$911.59

Vyrsa 150 Brass Impact Sprinkler (14.5mm x 6.3mm Dual Nozzle)


SKU ISI-VYR15014563
MPN VYR-150+V150N-14.5+V36N-6.3R
Warranty 12 month

In stock

Only
$524.94

$911.59
Vyrsa 150 Brass Impact Sprinkler (16.0mm x 6.3mm Dual Nozzle)SKU: ISI-VYR15016063$524.94
$911.59

Vyrsa 150 Brass Impact Sprinkler (16.0mm x 6.3mm Dual Nozzle)


SKU ISI-VYR15016063
MPN VYR-150+V150N-16+V36N-6.3R
Warranty 12 month

In stock

Only
$524.94

$911.59
Vyrsa 150 Brass Impact Sprinkler (Body Only)SKU: ISI-VYR150$484.04
$829.79

Vyrsa 150 Brass Impact Sprinkler (Body Only)


SKU ISI-VYR150
MPN VYR-150
Warranty 12 month

Available in 2-5 Days

Only
$484.04

$829.79

Videos

VYR S.A. Corp. eng

Specifications

Vyrsa 150 Brass Impact Sprinkler (9.0mm x 3.2mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (10.0mm x 3.2mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (11.0mm x 3.2mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (13.0mm x 6.3mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (14.5mm x 6.3mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (16.0mm x 6.3mm Dual Nozzle)Vyrsa 150 Brass Impact Sprinkler (Body Only)
TypeAdjustable Impact SprinklerAdjustable Impact SprinklerAdjustable Impact SprinklerAdjustable Impact SprinklerAdjustable Impact SprinklerAdjustable Impact SprinklerAdjustable Impact Sprinkler Body
MaterialBrassBrassBrassBrassBrassBrassBrass
ColourBrassBrassBrassBrassBrassBrassBrass
Min. Flow Output (Lpm)103128157303333430
Max. Flow Output (Lpm)142172210325358466
Min. Recommended Pressure (kPa)500600600600600600
Max. Recommended Pressure (kPa)700700700700700700700
Min. Spray Radius (m)2525253434.536
Max. Spray Radius (m)3737373636.537

Brass Impact Sprinklers FAQs

What’s the best type of sprinkler for my garden?

There’s no best type of sprinkler, just better sprinklers for different applications. Gear Drives are better for large areas, over 5m. Pop-Ups are ideal for 1.5-5m & Micro sprays are excellent for anything under that.

What type of nozzles should I use?

The type of nozzle all depends on how far you need to spray, each nozzle is specified by the radius it sprays & the spray arc it provides (0-360 degrees). Aim to spray to the base of the next closest sprinkler for even watering. For more information on planning, check out our Product Guides.

How many sprinklers can I have on a single irrigation zone?

Each sprinkler & nozzle will push out water at different rates, but the key factor is the flow rate of your water supply. Work that out with a simple timed bucket test. From there, you can work out how much water each sprinkler you’re looking at uses & work within your flow limit. For more information, check our Product Guides.

Should I flush my watering system before running it?

As you install a system, it’s almost inevitable that small fragments of dirt will get into the pipe, for this reason you should always flush out the system before running it the first time. This can be done by leaving an open end at the farthest point of each irrigation zone & operating the zone for 15 or so seconds to flush it out. Then plug it up & you’re good to go! This can also be said for any other times dirt may have gotten into the system (eg: further irrigation repairs or a mains water supply fault).

Can I have drip tube & sprinklers on the same irrigation zone?

We definitely don’t recommend it. Typically, drip tube will deliver the water at a far slower rate that sprays. Because of this, if you were to have both on the same zone, the areas with drip would be left far drier than the areas with sprinkler coverage. If you do want to water some areas with drip & some with sprinklers, it can be done, but each will just need to be run on their own separate irrigation zones.

How far apart should I position my sprinklers from each other?

Firstly, each sprinkler &/or nozzle has a specified spray radius. Secondly, sprinklers are typically designed to deliver more water at their base & progressively less the further away you get. For this reason, you want to position sprinklers so they spray to hit the base of the next sprinkler. Of course this isn’t possible all the time so in those cases, aim to spray at least 80% of the way. By doing this you will guarantee even water across your lawn or garden.

Do I need a filter on my irrigation system?

Even on a typical domestic system running on mains water a filter is still a good idea. In the event of a water main fault where rubbish does find it’s way down the line, a filter will protect the system from blockage and or failure. On systems operating off recycled water, like from a tank, a screen filter is mandatory. Debris like silt & dirt from recycled water is the most common cause of blockages of failures in irrigation systems.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Brass Impact Sprinklers Help

Need extra help with Brass Impact Sprinklers? Check out these resources from our Help Centre

Vyrsa 150 Full/Part Circle Brass Impact Sprinkler

Login

Main Menu

Powered by Verifalia email verifier