Hunter Wind-Clik Wind Sensor

Hunter Wind-Clik Wind Sensor

Hunter's Wind-Clik provides system information for irrigation control during high wind conditions.

Look at any sprinkler’s performance chart and you’ll see that the data was gathered from tests conducted under zero wind conditions. Of course, in the real world, not every day is a calm one. And, while most sprinklers can still perform at close to peak efficiency with some type of breeze, when the air movement starts to get stronger, water coverage can get challenging, questionable and downright messy. It can even become a liability issue when windblown sprinklers soak pedestrian paths or roadways with passing cars.

The Hunter Wind-Clik offers the most cost-effective solution to such situations as it shuts off irrigation systems during periods of high wind (shut down points are adjustable), then automatically resets the system when conditions are more favorable.

With Wind-Clik you’ll save water, worry and money as your system will only be operating at the times when you can be sure that the water intended for your landscape will reach its destination. For effective wind control, you’ll be blown away by Wind-Clik…instead of simply seeing your water blown away by the wind.

Hunter Wind-Clik Wind Sensor
Specs
Type Wind Sensor
Material Plastic
Colour Grey
IP Rating Weatherproof
Power Supply 24v AC
  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • In rare applications, like on a wall under a well covered patio where the space is 100% dry all the time & not exposed to the sun, an indoor controller will continue to operate without issue. But if you’re not sure, we recommend installing an outdoor model. If something does go wrong with your controller due to water damage or the LCD screen failing from sun exposure, the warranty is voided so it’s not worth the risk.

  • A garden tap is an excellent place to connect your irrigation system. Ideally, install a connection point behind the tap (turn the water off first) so you can still use your tap to fill a bucket when you need to.

  • Yes, irrigation controllers typically have a manual function, this will allow you to both operate all zones, or each one individually as you please.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • In some states a rain sensor is mandatory, but regardless it’s something you should include in your irrigation system. Having your system turn on in the middle of a day of rain is not only embarrassing, it’s a terrible waste of water & the overwatering is bad for your garden!

  • Well you’re in the right place! We’ve got it all here. The first step, is drawing out a plan of your garden, to scale of course. We’ve got Grid Paper in our Product Guides & all the advice you’ll need in there too!

  • We get any number of calls from people across the country who've bought from overseas & have problems. From electrical output problems to thread compatibility problems & other problems that we aren't able to help with!

    By buying from SunshowerOnline, right here in Australia, you can be sure that your warranty issues are covered, that compatibility & compliance isn't an issue & that you'll be able to get helpful after service advice. 

  • Domestic irrigation controllers will always operate zones one at a time. Even if you try to operate 2 to come on at the same time, the controller will automatically delay the operation of the second zone until after the first zone has finished running.

Write a review

Please login or register to review
  • $240.70
    $330.95
    $240.70 $330.95 Ex Tax: $240.70
    • SKU: ICS-HUNWINDCLIK
    • Brand: Hunter
    • MPN: WINDCLICK
    • Availability: Ships in 1-3 Days
    • Warranty: 5 year