Hunter Wireless Handheld Decoder Programmer

Hunter Wireless Handheld Decoder Programmer

More than a simple programmer, the ICD-HP Handheld Programmer is a field tool designed to help operators of decoder systems work as efficiently and effectively as possible. This industrial-grade outdoor instrument saves installation and diagnostic time, and helps operators get the most out of Hunter decoder systems. Using innovative wireless induction, the ICD-HP permits a full range of programming, diagnostic and operational features, without removal of waterproof connectors. The programmer's waterproof programming cup communicates with Hunter decoders through the decoder case—wirelessly. Packaged in an outdoor carrying case, this complete kit includes probes, induction cup, cable, USB power cable for bench use, and 4 AA batteries for field work.



FEATURES

  • Program or re-program decoder stations, whether new or installed
  • Program any station numbers in any order, or skip stations for future expansion
  • Simplifies setup and diagnostics for sensor decoders
  • Sensor test functions for Clik and Flow sensors, plus built-in multimeter
  • Communicates with decoder through plastic case: wireless electro-magnetic induction saves waterproof connectors
  • Compatible with Hunter ICD, Dual, and Pilot series decoders
  • USB powered for shop or office use; 4 AA batteries for field use
  • All test leads and cables included in durable, foam-padded carrying case
  • Turn decoder stations on and view solenoid status, current in milliamps, and more
  • Waterproof programming cup
  • Backlit adjustable display
  • 6 international operating languages

Hunter Wireless Handheld Decoder Programmer
Specs
Type Decoder Programmer
Material Plastic
Colour Blue, Yellow
Power Supply 4 x AA Batteries. USB Connector
  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • In rare applications, like on a wall under a well covered patio where the space is 100% dry all the time & not exposed to the sun, an indoor controller will continue to operate without issue. But if you’re not sure, we recommend installing an outdoor model. If something does go wrong with your controller due to water damage or the LCD screen failing from sun exposure, the warranty is voided so it’s not worth the risk.

  • A garden tap is an excellent place to connect your irrigation system. Ideally, install a connection point behind the tap (turn the water off first) so you can still use your tap to fill a bucket when you need to.

  • Yes, irrigation controllers typically have a manual function, this will allow you to both operate all zones, or each one individually as you please.

  • Even on a typical domestic system running on mains water a filter is still a good idea. In the event of a water main fault where rubbish does find it’s way down the line, a filter will protect the system from blockage and or failure. On systems operating off recycled water, like from a tank, a screen filter is mandatory. Debris like silt & dirt from recycled water is the most common cause of blockages of failures in irrigation systems.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • In some states a rain sensor is mandatory, but regardless it’s something you should include in your irrigation system. Having your system turn on in the middle of a day of rain is not only embarrassing, it’s a terrible waste of water & the overwatering is bad for your garden!

  • In some states a rain sensor is mandatory, but regardless it’s something you should include in your irrigation system. Having your system turn on in the middle of a day of rain is not only embarrassing, it’s a terrible waste of water & the overwatering is bad for your garden!

  • Well you’re in the right place! We’ve got it all here. The first step, is drawing out a plan of your garden, to scale of course. We’ve got Grid Paper in our Product Guides & all the advice you’ll need in there too!

  • We get any number of calls from people across the country who've bought from overseas & have problems. From electrical output problems to thread compatibility problems & other problems that we aren't able to help with!

    By buying from SunshowerOnline, right here in Australia, you can be sure that your warranty issues are covered, that compatibility & compliance isn't an issue & that you'll be able to get helpful after service advice. 

  • Domestic irrigation controllers will always operate zones one at a time. Even if you try to operate 2 to come on at the same time, the controller will automatically delay the operation of the second zone until after the first zone has finished running.

Write a review

Please login or register to review
  • $1,330.00
    $1,922.00
    $1,330.00 $1,922.00 Ex Tax: $1,330.00
    • SKU: IDP-HUNHP
    • Brand: Hunter
    • MPN: ICD-HP
    • Availability: Ships in 1-3 Days
    • Warranty: 1 Year