Hunter I-Core Dual Decoder Controller

Hunter I-Core Dual Decoder Controller

With all the intelligent features of I-Core, upgrading to Dual just means you're doing the best job even faster. Now the intuitive I-Core, the controller of choice for mid-range commercial projects, can be converted to two-wire capability with a Dual module. You'll see savings in labor, maintenance, troubleshooting, and wire, all while enjoying I-Core's state of the art features and benefits, including real-time flow monitoring, quick access to a whole system overview, a factory-installed SmartPort®, six language capability, and a bold, graphic display. And with the familiar programming of a Hunter controller, installing that first two-wire system is no problem for both you and the client. Just as Hunter pioneered the successful technology of modular controllers for the industry, they are bringing the groundbreaking two-wire decoder innovation to irrigation professionals for all sizes of systems. Why run 50 wires when you only need two? 


Dual decoders come in one and two-station versions. Aptly named Dual-1 and Dual-2, the decoder choices ensure any I-Core Dual system is customizable to the needs of any installation. Number of 2-wire paths: 3

Hunter I-Core 48 Zone Decoder Controller1 Station Decoder for Hunter I-Core Dual Controllers2 Station Decoder for Hunter I-Core Dual Controllers
Specs
Type Decoder Controller Decoder Decoder
Material Plastic
Colour Grey
IP Rating Weatherproof
Power Supply 240v AC 24V AC
Power Output 24v AC
No. of Programs 4
No. of Start Times 8
No. of Zones 48 1 2
Max. Run Time 12 Hours
  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • In rare applications, like on a wall under a well covered patio where the space is 100% dry all the time & not exposed to the sun, an indoor controller will continue to operate without issue. But if you’re not sure, we recommend installing an outdoor model. If something does go wrong with your controller due to water damage or the LCD screen failing from sun exposure, the warranty is voided so it’s not worth the risk.

  • A garden tap is an excellent place to connect your irrigation system. Ideally, install a connection point behind the tap (turn the water off first) so you can still use your tap to fill a bucket when you need to.

  • Yes, irrigation controllers typically have a manual function, this will allow you to both operate all zones, or each one individually as you please.

  • Even on a typical domestic system running on mains water a filter is still a good idea. In the event of a water main fault where rubbish does find it’s way down the line, a filter will protect the system from blockage and or failure. On systems operating off recycled water, like from a tank, a screen filter is mandatory. Debris like silt & dirt from recycled water is the most common cause of blockages of failures in irrigation systems.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • In some states a rain sensor is mandatory, but regardless it’s something you should include in your irrigation system. Having your system turn on in the middle of a day of rain is not only embarrassing, it’s a terrible waste of water & the overwatering is bad for your garden!

  • In some states a rain sensor is mandatory, but regardless it’s something you should include in your irrigation system. Having your system turn on in the middle of a day of rain is not only embarrassing, it’s a terrible waste of water & the overwatering is bad for your garden!

  • Well you’re in the right place! We’ve got it all here. The first step, is drawing out a plan of your garden, to scale of course. We’ve got Grid Paper in our Product Guides & all the advice you’ll need in there too!

  • We get any number of calls from people across the country who've bought from overseas & have problems. From electrical output problems to thread compatibility problems & other problems that we aren't able to help with!

    By buying from SunshowerOnline, right here in Australia, you can be sure that your warranty issues are covered, that compatibility & compliance isn't an issue & that you'll be able to get helpful after service advice. 

  • Domestic irrigation controllers will always operate zones one at a time. Even if you try to operate 2 to come on at the same time, the controller will automatically delay the operation of the second zone until after the first zone has finished running.

Write a review

Please login or register to review
  • $1,325.00
    $1,878.00
    $1,325.00 $1,878.00 Ex Tax: $1,325.00
    • SKU: ICD-HUNICCDUAL
    • Brand: Hunter
    • MPN: HI-IC48DUALC
    • Availability: Ships in 1-3 Days
  • $145.00
    $212.45
    $145.00 $212.45 Ex Tax: $145.00
    • SKU: IDD-HUNIC1
    • Brand: Hunter
    • MPN: DUAL1
    • Availability: Ships in 1-3 Days
  • $275.00
    $367.00
    $275.00 $367.00 Ex Tax: $275.00
    • SKU: IDD-HUNIC2
    • Brand: Hunter
    • MPN: DUAL2
    • Availability: Ships in 1-3 Days