SunshowerOnline Logo

The Hunter MP Special Pattern Rotators are ideal for unusual shaped areas that fit any conventional pop-up spray body or shrub adapter.

Water Conservation Tool

  • Multi-trajectory rotating streams provide unmatched uniformity
  • Automatic matched precipitation even after arc & radius adjustment
  • Low application rate reduces runoff on slopes & tight soils

Proven Durability & Reliability

  • Rotator® Technology proven in demanding agricultural conditions since 1987
  • One moving part
  • Patented “double-pop” flushes on start-up and shut-down without increasing spray head flow-by

Simple Adjustments

  • Easy arc adjustment
  • Easy radius adjustment – up to 25%
  • No need to change nozzle to maintain matched precipitation
  • Removable inlet filter for easy cleaning

Simplify Design & Installation

  • The MP Strips, MP Corner, MP1000, MP2000, MP3000 & MP3500 can be combined on the same zone

Hunter MP Rotator Special Pattern Nozzles

Hunter MP Left Strip NozzleSKU: ISN-HUNMPSTL$12.05
$23.63

Hunter MP Left Strip Nozzle


SKU ISN-HUNMPSTL
MPN MPLCS515

In stock

Only
$12.05

$23.63
Hunter MP Right Strip NozzleSKU: ISN-HUNMPSTR$12.05
$23.40

Hunter MP Right Strip Nozzle


SKU ISN-HUNMPSTR
MPN MPRCS515

In stock

Only
$12.05

$23.40
Hunter MP Side Strip NozzleSKU: ISN-HUNMPSTS$12.05
$24.32

Hunter MP Side Strip Nozzle


SKU ISN-HUNMPSTS
MPN MPSS530

In stock

Only
$12.05

$24.32
Hunter MP Corner NozzleSKU: ISN-HUNMPCORNER$12.05
$23.66

Hunter MP Corner Nozzle


SKU ISN-HUNMPCORNER
MPN MPCORNER

In stock

Only
$12.05

$23.66
Hunter MP Left Strip Nozzles (bag of 10)SKU: ISN-HUNMPSTL/10$124.28
$212.65

Hunter MP Left Strip Nozzles (bag of 10)


SKU ISN-HUNMPSTL/10
MPN MPLCS515/10

In stock

Only
$124.28

$212.65
Hunter MP Right Strip Nozzles (bag of 10)SKU: ISN-HUNMPSTR/10$123.97
$210.57

Hunter MP Right Strip Nozzles (bag of 10)


SKU ISN-HUNMPSTR/10
MPN MPRCS515/10

In stock

Only
$123.97

$210.57
Hunter MP Side Strip Nozzles (bag of 10)SKU: ISN-HUNMPSTS/10$124.41
$218.89

Hunter MP Side Strip Nozzles (bag of 10)


SKU ISN-HUNMPSTS/10
MPN MPSS530/10

In stock

Only
$124.41

$218.89
Hunter MP Corner Nozzles (bag of 10)SKU: ISN-HUNMPCORNER/10$119.20
$212.95

Hunter MP Corner Nozzles (bag of 10)


SKU ISN-HUNMPCORNER/10
MPN MPCORNER/10

In stock

Only
$119.20

$212.95

Videos

MP Rotator Sprinkler Overview

Specifications

Hunter MP Left Strip NozzleHunter MP Right Strip NozzleHunter MP Side Strip NozzleHunter MP Corner NozzleHunter MP Left Strip Nozzles (bag of 10)Hunter MP Right Strip Nozzles (bag of 10)Hunter MP Side Strip Nozzles (bag of 10)Hunter MP Corner Nozzles (bag of 10)
TypeAdjustable Rotary Nozzle
MaterialPlastic
ColourBlack, Turquoise
Inlet Thread Size10mm Female Thread
Min. Flow Output (Lpm)0.61
Max. Flow Output (Lpm)2
Min. Recommended Pressure (kPa)170
Max. Recommended Pressure (kPa)380
Min. Spray Radius (m)1.5
Max. Spray Radius (m)4.6

Low Flow Rotator Nozzles FAQs

What’s the best type of sprinkler for my garden?

There’s no best type of sprinkler, just better sprinklers for different applications. Gear Drives are better for large areas, over 5m. Pop-Ups are ideal for 1.5-5m & Micro sprays are excellent for anything under that.

What type of nozzles should I use?

The type of nozzle all depends on how far you need to spray, each nozzle is specified by the radius it sprays & the spray arc it provides (0-360 degrees). Aim to spray to the base of the next closest sprinkler for even watering. For more information on planning, check out our Product Guides.

How many sprinklers can I have on a single irrigation zone?

Each sprinkler & nozzle will push out water at different rates, but the key factor is the flow rate of your water supply. Work that out with a simple timed bucket test. From there, you can work out how much water each sprinkler you’re looking at uses & work within your flow limit. For more information, check our Product Guides.

Should I flush my watering system before running it?

As you install a system, it’s almost inevitable that small fragments of dirt will get into the pipe, for this reason you should always flush out the system before running it the first time. This can be done by leaving an open end at the farthest point of each irrigation zone & operating the zone for 15 or so seconds to flush it out. Then plug it up & you’re good to go! This can also be said for any other times dirt may have gotten into the system (eg: further irrigation repairs or a mains water supply fault).

Can I have drip tube & sprinklers on the same irrigation zone?

We definitely don’t recommend it. Typically, drip tube will deliver the water at a far slower rate that sprays. Because of this, if you were to have both on the same zone, the areas with drip would be left far drier than the areas with sprinkler coverage. If you do want to water some areas with drip & some with sprinklers, it can be done, but each will just need to be run on their own separate irrigation zones.

How far apart should I position my sprinklers from each other?

Firstly, each sprinkler &/or nozzle has a specified spray radius. Secondly, sprinklers are typically designed to deliver more water at their base & progressively less the further away you get. For this reason, you want to position sprinklers so they spray to hit the base of the next sprinkler. Of course this isn’t possible all the time so in those cases, aim to spray at least 80% of the way. By doing this you will guarantee even water across your lawn or garden.

Do I need a filter on my irrigation system?

Even on a typical domestic system running on mains water a filter is still a good idea. In the event of a water main fault where rubbish does find it’s way down the line, a filter will protect the system from blockage and or failure. On systems operating off recycled water, like from a tank, a screen filter is mandatory. Debris like silt & dirt from recycled water is the most common cause of blockages of failures in irrigation systems.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Low Flow Rotator Nozzles Help

Need extra help with Low Flow Rotator Nozzles? Check out these resources from our Help Centre

Hunter MP Rotator Special Pattern Nozzles

Login

Main Menu

Powered by Verifalia email verifier