Brass Threaded Fittings

Brass Threaded Fittings

We have great priced brass threaded fittings for water & gas applications. There's a whole range of fittings & sizes to suit any application.

Show:
Sort By:
Brass Caps
$1.88 $2.68 Ex Tax: $1.88

Brass Caps

Use this quality brass cap to permanently or temporarily end pipelines.The Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Nipples
$2.31 $3.30 Ex Tax: $2.31

Brass Nipples

Join two F.I. brass fittings with this nipple.The Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Bushes
$2.46 $3.52 Ex Tax: $2.46

Brass Bushes

Use the brass bush to reduce tube size or connect two different sized threadsThe Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Sockets
$2.59 $3.70 Ex Tax: $2.59

Brass Sockets

Connect two M.I. fittings with these brass socketsThe Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Plugs
$2.62 $3.74 Ex Tax: $2.62

Brass Plugs

Close off F.I. fittings with this plugThe Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Nipples (Reducing)
$2.93 $4.18 Ex Tax: $2.93

Brass Nipples (Reducing)

Join two F.I. brass fittings with this nippleThe Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Elbows
$5.01 $7.15 Ex Tax: $5.01

Brass Elbows

Change pipeline direction by connecting M.I. fittings into this brass elbowThe Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass Tees
$5.39 $7.70 Ex Tax: $5.39

Brass Tees

Connect 3 pipelines with M.I. fittings using these brass tees.The Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs to be protected from damage...

Brass All Thread Risers
$16.94 $24.20 Ex Tax: $16.94

Brass All Thread Risers

Use the all thread cut off riser to cut to size for any job, bring out a tap from a rendered wall and cut to size for the perfect fit.The Brass Threaded fittings we sell are excellent quality, we use them on our installations and are excellent for water connections or high pressure applications as well as situations where the pipeline needs..

Need Help with Brass Threaded Fittings?

Brass Threaded Fittings FAQs

Brass Threaded Fittings FAQs
  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • Whenever you’re connecting two threaded fittings, teflon is required. The only exception is whenever either fitting has an O-ring, in this case, do not apply teflon as it may cause the O-ring to not seal correctly. The amount of teflon you apply depends on the application. In any constant pressure applications you look at up to wrapping around the thread up to 20 times, whereas in any non-constant pressure applications, like on irrigation risers, 2 or 3 times around the thread is enough.

  • There’s no requirement to bury irrigation pipes any depth, but there are a couple of things to consider; Allow enough room to run the pipe under your sprinklers so they sit at the right height & think about going deeper to avoid damage in areas where future digging or planting might happen. 20-30cm is often deep enough.

  • Pipe sizing is all about reducing friction loss & allowing maximum flow to all points of your garden. There are a number of variables to consider, but in most domestic applications, 19mm Poly Pipe is the common choice. In larger areas, where you may have to run pipe 30-40m to the start of an irrigation zone, or zones with large sprinklers with high flow requirements, you may want to consider upping your pipe size to 25mm of more boost that flow output.

  • The type of pipe you use depends on the water pressure of the application. For example, in any application under constant mains pressure like before your Irrigation Valves, you’ll need pipe that can cope. This rules out Low Density Poly Pipe & you’ll need to use something like Class 12 PVC or Metric Poly Pipe, these typically have a rating of Class 12, or PN12 which translates to being able to cope with 1200kPa. For irrigation lines after the valves in most domestic applications, Low Density Poly Pipe is ideal. In this situation, the operating pressure is much lower because the water is able to escape out of the operating sprinklers or drip tube & once the valves shut off, there is no static pressure build up.

  • We get any number of calls from people across the country who've bought from overseas & have problems. From electrical output problems to thread compatibility problems & other problems that we aren't able to help with!

    By buying from SunshowerOnline, right here in Australia, you can be sure that your warranty issues are covered, that compatibility & compliance isn't an issue & that you'll be able to get helpful after service advice. 

View More View All FAQs