Brass Impact Sprinklers

Brass Impact Sprinklers

Brass impact sprinklers are designed with supreme strength & durability, allowing them to irrigate larger areas than the plastic impact sprinklers available. Our range includes full and part circle models.

Show:
Sort By:
Vyrsa 25 Full Circle Brass Impact Sprinkler
$25.56 $30.25 Ex Tax: $25.56

Vyrsa 25 Full Circle Brass Impact Sprinkler

The Vyrsa 25 brass impact sprinkler is a robust, low angle brass sprinkler, ideal for undertree and nursery applications. Brass sprinkler. 15mm male thread. Full circle. 24° nozzle trajectory. Equivalent: Toro Premier ..

HR 2012X Full Circle Brass Impact Sprinkler (4.6mm x 3.2mm dual nozzle)
$33.10 $79.38 Ex Tax: $33.10

HR 2012X Full Circle Brass Impact Sprinkler (4.6mm x 3.2mm dual nozzle)

The HR 2012X is a solid full circle impact sprinkler used for solid set, overhead and portable sprinkler systems. Full circle brass sprinkler 20mm male thread Dual nozzle (option) 25° trajectory Equivalent Naan 233, Toro Model 2, Toro Model TR2 (check nozzles) ..

Vyrsa 35 Full Circle Brass Impact Sprinkler
$33.11 $39.60 Ex Tax: $33.11

Vyrsa 35 Full Circle Brass Impact Sprinkler

The Vyrsa 35 is the workhorse of solid set, overhead and portable sprinkler systems. Full circle brass sprinkler. 20mm male or female thread. Dual nozzle. 26° trajectory (both nozzles). Equivalent to NAAN 233, Toro Model 2 & Toro Model TR2 ..

Vyrsa 80 Full/Part Circle Brass Impact Sprinkler
$38.02 $46.59 Ex Tax: $38.02

Vyrsa 80 Full/Part Circle Brass Impact Sprinkler

The Vyrsa 80 brass impact sprinkler is a robust part-circle sprinkler for landscape, small horticulture blocks, nursery and greenhouse irrigation. Brass sprinkler Part-circle (can be adjusted to full-circle) Stream deflector and diffuser Pin for radius adjustment. Anti-backsplash arm 15mm male thread 2..

Vyrsa 70 Full Circle Brass Impact Sprinkler
$38.77 $49.50 Ex Tax: $38.77

Vyrsa 70 Full Circle Brass Impact Sprinkler

The Vyrsa 70 is a large area impact with big nozzles for longer throws. For all agricultural watering. Full circle brass sprinkler 20mm male thread Dual nozzle Main nozzle 26° Secondary nozzle 22° Equivalent to NAAN 233, Toro Model S, Toro President & Toro Monsoon ..

Vyrsa 60 Full/Part Circle Brass Impact Sprinkler
$57.54 $71.39 Ex Tax: $57.54

Vyrsa 60 Full/Part Circle Brass Impact Sprinkler

The Vyrsa 60 is a robust part-circle sprinkler for sprinkler systems that must avoid overthrowing onto roads, paths or adjoining areas. Brass sprinkler 20mm male thread Part-Circle (can be adjusted to full circle) Dual nozzle Secondary nozzle 12° Main nozzle 24° Equivalent to: NAAN 233PC & Toro Noz..

Vyrsa 70V Full Circle Brass Impact Sprinkler
$78.91 $107.69 Ex Tax: $78.91

Vyrsa 70V Full Circle Brass Impact Sprinkler

The Vyrsa 70V is a robust full circle sprinkler for systems with large sprinkler spacings. Brass sprinkler full circle 25mm female thread Dual nozzle 26° nozzle trajectory Equivalent to NAAN 254 & Toro Model 15 ..

Vyrsa 65 Full/Part Circle Brass Impact Sprinkler
$116.90 $145.20 Ex Tax: $116.90

Vyrsa 65 Full/Part Circle Brass Impact Sprinkler

The Vyrsa brass part-circle sprinkler is designed for dust suppression and watering in mining and construction sites, feedlots. racetracks and arenas. Also suitable for small travelling irrigators. Features: Brass sprinkler 25mm male thread Part-Circle (can be adjusted to full circle) Dual nozzle Secondary nozzle ..

Vyrsa 155 Full Circle Brass Impact Sprinkler
$137.58 $214.50 Ex Tax: $137.58

Vyrsa 155 Full Circle Brass Impact Sprinkler

The Vyrsa 155 large brass full-circle sprinkler is ideal for wide-spaced sprinkler systems in paddocks, feedlots and arenas and also for dust protection and watering systems in mining and construction sites. Full circle brass sprinkler 32mm male thread Three nozzles Main nozzle 28° Rear nozzle 28° Close in n..

Vyrsa 150 Full/Part Circle Brass Impact Sprinkler
$217.01 $451.68 Ex Tax: $217.01

Vyrsa 150 Full/Part Circle Brass Impact Sprinkler

The Vyrsa 150 large brass part-circle sprinkler is designed for dust suppression and watering in mining and construction sites, feedlots, racetracks and arenas. Also suitable for small travelling irrigators. Features: Brass sprinkler 32mm male thread Part-Circle (can be adjusted to full circle) Dual nozzle Main no..

Need Help with Brass Impact Sprinklers?

Brass Impact Sprinklers FAQs

Brass Impact Sprinklers FAQs
  • The main safety concern is regarding the water supply. To avoid contamination of the mains water upstream, in most municipalities, a Dual Check Valve is required at the water connection.

  • We definitely don’t recommend it. Typically, drip tube will deliver the water at a far slower rate that sprays. Because of this, if you were to have both on the same zone, the areas with drip would be left far drier than the areas with sprinkler coverage. If you do want to water some areas with drip & some with sprinklers, it can be done, but each will just need to be run on their own separate irrigation zones.

  • A garden tap is an excellent place to connect your irrigation system. Ideally, install a connection point behind the tap (turn the water off first) so you can still use your tap to fill a bucket when you need to.

  • Even on a typical domestic system running on mains water a filter is still a good idea. In the event of a water main fault where rubbish does find it’s way down the line, a filter will protect the system from blockage and or failure. On systems operating off recycled water, like from a tank, a screen filter is mandatory. Debris like silt & dirt from recycled water is the most common cause of blockages of failures in irrigation systems.

  • No, unless you’re tapping into your water supply, a plumber isn’t required. Most domestic irrigation systems can be installed by anyone half handy.

  • Firstly, each sprinkler &/or nozzle has a specified spray radius. Secondly, sprinklers are typically designed to deliver more water at their base & progressively less the further away you get. For this reason, you want to position sprinklers so they spray to hit the base of the next sprinkler. Of course this isn’t possible all the time so in those cases, aim to spray at least 80% of the way. By doing this you will guarantee even water across your lawn or garden.

  • Each sprinkler & nozzle sprays water at different rates, but the key factor is the flow rate of your water supply. Work that out with a simple timed bucket test. From there, you can work out how much water each sprinkler you’re looking at uses & work within your flow limit. For more information, check our Product Guides.

  • Well you’re in the right place! We’ve got it all here. The first step, is drawing out a plan of your garden, to scale of course. We’ve got Grid Paper in our Product Guides & all the advice you’ll need in there too!

  • As you install a system, it’s almost inevitable that small fragments of dirt will get into the pipe, for this reason you should always flush out the system before running it the first time. This can be done by leaving an open end at the farthest point of each irrigation zone & operating the zone for 15 or so seconds to flush it out. Then plug it up & you’re good to go! This can also be said for any other times dirt may have gotten into the system (eg: further irrigation repairs or a mains water supply fault).

  • The type of nozzle all depends on how far you need to spray, each nozzle is specified by the radius it sprays & the spray arc it provides (0-360 degrees). Aim to spray to the base of the next closest sprinkler for even watering. For more information on planning, check out our Product Guides.

  • There’s no best type of sprinkler, just better sprinklers for different applications. Gear Drives are better for large areas, over 5m. Pop-Ups are ideal for 1.5-5m & Micro sprays are excellent for anything under that.

  • We get any number of calls from people across the country who've bought from overseas & have problems. From electrical output problems to thread compatibility problems & other problems that we aren't able to help with!

    By buying from SunshowerOnline, right here in Australia, you can be sure that your warranty issues are covered, that compatibility & compliance isn't an issue & that you'll be able to get helpful after service advice. 

View More View All FAQs