SunshowerOnline Logo

These full-featured, rugged, debris-tolerant valves feature flow ranges from 1 to 113 LPM, making them ideal for everything from drip to high-flow residential and light-commericial application.

  • Flow range from 1- 113 Lpm.
  • Pressure range from 70 – 1034 kPa.
  • Manual internal bleed enables valveto be opened without filling valve box with water.
  • Manual external bleed allows valve to be opened with less pressure and keeps valve clean from debris (flush mode).
  • Debris tolerant design makes valve suitable for bores and dirty water applications.
  • High flow, low friction loss design.
  • Optional ergonomic flow control allows precise flow adjustment

Irritrol (Richdel) 2500 Series Solenoid Valves

Irritrol (Richdel) 2500 Solenoid Valve 25mmSKU: IVL-IRR2500MT$47.34
$68.61

Irritrol (Richdel) 2500 Solenoid Valve 25mm


SKU IVL-IRR2500MT
MPN 2500MT
Warranty 12 month

In stock

Only
$47.34

$68.61
Irritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)SKU: IVL-IRR2500MTF$37.51
$56.27

Irritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)


SKU IVL-IRR2500MTF
MPN 2500MTF
Warranty 12 month

In stock

Only
$37.51

$56.27
Irritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)(DC Latching Coil)SKU: IVL-IRR2500MTFDC$68.24
$115.20

Irritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)(DC Latching Coil)


SKU IVL-IRR2500MTFDC
MPN 2500-MTF-DCL-A
Warranty 12 month

In stock

Only
$68.24

$115.20

Videos

What's inside an irrigation solenoid valve?
Set up your solenoid valves for drip irrigation
The perfect way to join cable for Low Voltage Lighting & Irrigation.

Manuals & Links

Specifications

Irritrol (Richdel) 2500 Solenoid Valve 25mmIrritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)Irritrol (Richdel) 2500 Solenoid Valve 25mm (inc. Flow Cont.)(DC Latching Coil)
TypeScrew Top Solenoid ValveScrew Top Solenoid ValveScrew Top Solenoid Valve
MaterialPlasticPlasticPlastic
ColourGreyGreyGrey
Inlet Thread Size25mm BSPF25mm BSPF25mm BSPF
Outlet Thread Size25mm BSPF25mm BSPF25mm BSPF
Min. Flow Output (Lpm)111
Max. Flow Output (Lpm)113113113
Max. Inlet Pressure (kPa)104010401040
Min. Recommended Pressure (kPa)707070
Max. Recommended Pressure (kPa)104010401040
Power Supply24v AC24v AC12v DC Latching

Domestic Irrigation Valves FAQs

What is a solenoid valve?

A solenoid valve is the automatic tap that controls that flow of water to an irrigation zone. Solenoid Valves are automatically operated by an irrigation controller which is programmed to tell the solenoid valve when to open & close.

How many solenoid valves should I use?

The number of solenoid valves you use depends on the size of your garden & the flow output of your water supply. The number of litres per minute that are available will determine the number of sprinklers or drippers you can operate at any one time. Once your garden is divided up into each section using that information, you’ll need one solenoid valve to operate each one individually.

What is a master valve, and do I need one?

A master valve is installed upstream of the solenoid valves being used to control each irrigation zone. They’re not mandatory, but they are a good idea as installing one increases the life-span of each valve by protect the valves downstream from the constant pressure that would otherwise be applied. The way it works is, every time a zone is programmed to come on the master valve also switches on, providing the flow, but when all the zones are off, the master valve closes, holding back the flow & pressure of the water supply. Simply, it’s kind of like an irrigation insurance policy.

Can I just use electrical tape on my cable joins?

Being exposed to the weather, water damage will occur any where water can get in. Electrical tape isn’t quite water tight & over time water will creep into the circuit & create havoc & void all warranties. For this reason you should always use waterproof cable joins like heat shrinks.

My solenoid is staying on, how can I fix it?

Nearly all of the time, a solenoid valve staying open is caused by debris caught in the diaphragm. Even the finest debris can cause the valve not to seal shut, causing a constant leak. Other cause can be: Not enough flow because the irrigation zone is too small or, not enough pressure, the valve needs the pressure to seal shut.

Can I use my solenoid valves off a gravity feed?

Unless your tank located is upwards of 20m above your valves, gravity feed will not provide enough pressure for your valves to reliably open & close. It is not recommended.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John F. (Melbourne, VIC)
Irritrol (Richdel) 2500 Series Solenoid Valves

The product works as advertised.

Domestic Irrigation Valves Help

Need extra help with Domestic Irrigation Valves? Check out these resources from our Help Centre

Irritrol (Richdel) 2500 Series Solenoid Valves

Login

Main Menu

Powered by Verifalia email verifier